|
NOVUS
3
Heavy Scratch Remover
DESCRIPTION:
Removes heavy scratches and abrasions from most acrylic surfaces.
Use when damage is too severe to be restored with Novus 2
polish.
Requires
use of Novus 2 for final finishing. Not recommended for use
on coated plastics
DIRECTIONS:
1. Shake well. Test in an inconspicuous area.
2. Remove surface dust with clean, soft cloth.
3. Using clean, soft cloth, apply Novus 3 with firm back and
forth strokes at right angle to visible scratches. Reapply
polish as needed.
4. Continue polishing until only the fine scratches remain.
Using cloth, remove all of the remaining polish.
5. Apply Novus 2 in circular motion using a clean cloth. Follow
direction on the Novus 2 bottle.
Apply
Novus 3 liberally. Using a clean, soft cloth, polish with
a firm back-and-forth motion at right angles to the scratches.
Keep the cloth saturated with polish at all times.
Continue
polishing until only fine scratches remain. Using cloth, remove
all remaining polish, this is very important!
Using
a clean cloth, apply Novus 2 in a circular motion uniformly
to entire surface. Polish using light pressure until Novus
2 dries to a light haze.
Using
a clean portion of the cloth, buff the surface clean. Follow
with Novus 1 for best results.
[ Back To
Novus 3 ]
|